Tuesday, December 29, 2009

Tungsten Plugged Gold?

A month ago a friend sent me a gold investment article (at bottom) regarding the risk of buying gold ETF's backed by fake gold bars and a conspiracy theory involving the U.S. government, so I did a little investigating. I concluded that, while it is possible to fake the density of gold with gold-plating on tungsten bars, it wasn't possible to fake gold bars for even moderately sophisticated testing using other criteria. Since this dovetails with my last two posts on gold, I thought it might be of general interest so I'm posting here. I replied as follows:

----- begin reply -----
I see from google (searching "gold tungsten plugged bars fraud") that this story also was on kitco, but do you really think the U.S. Government was involved (even indirectly) in making plugged gold bars to suppress the price of gold? You didn't express an opinion.

Did they really do it? That's the $1123/oz question. I couldn't find anything on snopes. It would be a fraud the likes of which I've never heard, and the consequences would be, well, earth shaking. It seems rather unlikely, but I've gotten so suspicious of the government that I could almost believe it.

I looked up the density of gold and tungsten to verify the claim of equal density. It's hard to get an exact definition for a given temperature and isotopic composition, and web values are vague, but for best information I could quickly find, gold comes is 19.32 gm/cc at 293Kelvin and Tungsten comes is 19.3 gm/cc @ 293Kelvin (http://www.chemicalelements.com/elements/w.html).

The half-lives of gold isotopes are relatively short -- seconds to days, so it's not possible to have any appreciable mass fraction in any isotope but Au-197. Tungsten, however has stable isotopes of W-180, W-182, 183, 184, and W-186. The given values of tungsten density do not, as I say, indicate the mass fraction for each isotope, but W-184 is the most common isotope (31% of mined tungsten). That means, a bar of pure W-186 could be 1.1% more dense (or 19.5gm/cc) than a bar of W-184. So it's entirely feasible to mix 10% W-186 with 90% W-184 to get exactly the same density of tungsten as gold.

W-184 constitutes about 31% of known tungsten, and W-186 is 29% (http://en.wikipedia.org/wiki/Isotopes_of_tungsten). Even if we assume this is the fraction going into the density of 19.3gm/cc, it is still possible to skew the mass fraction of W-186 upward to give the same density of gold.

That said, there are tests other than density to detect a tungsten bar plated with gold. (eg, http://reactor-core.org/~djw/myblog/archives/2008/10/24/T12_14_56/) Nuclear resonance imaging would NOT help (gold plating shields the measurements), but magnetic fields reportedly have unique eddy-current signatures. I didn't investigate further here. It's possible. Eddy currents excited by an oscillating magnetic field will cause a material to heat up in proportion to the resistivity of the material. Some cook top ranges use this effect, and might be employed to analyze a gold bar. You could probably put a gold bar in a caloric bomb surrounded by a 60Hz field from a transformer, and measure the temperature rise over some minutes. A tungsten plugged bar should give higher temperature for the same heating time.

DC electrical resistance measurements could detect a plugged bar, if you contacted it carefully at both ends. (You'd probably needs a hydraulic press.) The resistivity of gold is 2.271 micro-ohm-cm at 300K. The resistivity of tungsten is 5.65 micro-ohm-cm. A bar plugged 50% with tungsten should have a resistivity about 3.971 micro-ohm-cm, about 74% higher. But you have to measure the resistance of an entire gold bar, which will be VERY low.

A 400 oz gold bar has dimensions of 20cm x 8cm x 4.5cm. The resistance end-to-end is 1.26167 micro-ohms. Applying a voltage of 10 microvolts across it would generate a current of 7.926 amps. A W-plugged gold bar would have a current of about 4.56amps. This would be a very noisy measurement, but if you filter the signal, it could be accurately measured with a cheap multimeter. The effect of contact resistance at both ends of the bar, however are significant. What it will do is reduce both currents and narrow the difference in dc current. That's why I say it's important to get a very good electrical contact which is very low resistance (less than the bar itself, preferably) and consistent from bar to bar measurements. But not impossible.

However, a dead sure test would be to measure the heat capacity of a gold bar, the amount of heat needed to raise the temperature of a material by 1 degree kelvin. Gold has a heat capacity of 0.129 joules / gm-K, and tungsten has a heat capacity of 0.134 J/gm-K. That's a difference of 3.88% which should be easily measurable -- unless someone was REALLY clever and used two or more elements to plug the gold to match both heat capacity and density. Not impossible in principle, but it would require research to ascertain if practical. But it would be difficult if not impossible to match heat capacity, density AND electrical resistivity, because gold is the third lowest resistance material, behind only copper and silver. But Cu and Ag are so much less dense than gold, I'm not sure you could compensate the higher resistivity of tungsten without lowering the density of the gold bar too much.

I could also imagine a sound test -- strike a gold bar with an exact force and duration with a computer controlled metal hammer, and measure the sound generated, then run that through a spectrum analyzer. A quick check shows tungsten has a velocity of sound of 5174 m/s and gold has a velocity of 1740m/s. That's a huge difference. You could hear that difference. For sure by dropping a tungsten plugged gold coin on the floor.

Another test is thermal conductivity. Gold is 320W/m-K and Tungsten is 174W/m-K. That would be just as hard to conceal, though the measurement would be awkward.

What I conclude is that plugged gold bars are easy to detect (and one reason gold is such an ideal monetary standard), but you do have to use the right techniques. I wonder what methods are used by the mints? I could see them getting defrauded by using only a density test, and once they take possession, even if they discover the fraud, they probably wouldn't want to reveal it.

It makes me wonder how silver bars / coins could be faked?

You know, in this day and age, there could be a market for low-cost gold testing machines, but of course, the thieves could fake those, too.

---- end reply to friend ----

-------- Posted Thursday, 12 November 2009 | Digg This ArticleDigg It! ---------
Source: GoldSeek.com

Gold Finger - A New Take On Operation Grand Slam With A Tungsten Twist
By: Rob Kirby

I’ve already reported on irregular physical gold settlements which occurred inLondon, England back in the first week of October, 2009. Specifically, these settlements involved the intermediation of at least one Central Bank [The Bank of England] to resolve allocated settlements on behalf of J.P. Morgan and Deutsche Bank – who DID NOT have the gold bullion that they had sold short and were contracted to deliver. At the same time I reported on two other unusual occurrences:

1) Irregularities in the publication of the gold ETF - GLD’s bar list from Sept. 25 – Oct.14 where the length of the bar list went from 1,381 pages to under 200 pages and then back up to 800 or so pages.

2) Reports of 400 oz. “good delivery” bricks of gold found gutted and filled with tungsten within the confines of LBMA approved vaults in Hong Kong.

Why Tungsten?

If anyone were contemplating creating “fake” gold bars, tungsten [at roughly $10 per pound] would be the metal of choice since it has the exact same density as gold making a fake bar salted with tungsten indistinguishable from a solid gold bar by simply weighing it.

Unfortunately, there are now more sordid details to report. When the news of tungsten “salted” gold bars in Hong Kong first surfaced, many people who I am acquainted with automatically assumed that these bars were manufactured in China – because China is generally viewed as “the knock-off capital of the world”. Here’s what I now understand really happened:

  • The amount of “salted tungsten” gold bars in question was allegedly between 5,600 and 5,700 – 400 oz – good delivery bars (roughly 60 metric tonnes). This was apparently all highly orchestrated by an extremely well financed criminal operation.
  • Within mere hours of this scam being identified – Chinese officials had many of the perpetrators in custody. And here’s what the Chinese allegedly uncovered:
  • Roughly 15 years ago – during the Clinton Administration [think Robert Rubin, Sir Alan Greenspan and Lawrence Summers] – between 1.3 and 1.5 million 400 oz tungsten blanks were allegedly manufactured by a very high-end, sophisticated refiner in the USA (more than 16 Thousand metric tonnes).
  • Subsequently, 640,000 of these tungsten blanks received their gold plating and WERE shipped to Ft. Knox and remain there to this day. I know folks who have copies of the original shipping docs with dates and exact weights of “tungsten” bars shipped to Ft. Knox.
  • The balance of this 1.3 million – 1.5 million 400 oz tungsten cache was also plated and then allegedly “sold” into the international market.

Apparently, the global market is literally “stuffed full of 400 oz salted bars”. Makes one wonder if the Indians were smart enough to assay their 200 tonne haul from the IMF?

A Slow Motion Train Wreck, Years in the Making

An obscure news item originally published in the N.Y. Post (written by Jennifer Anderson) in late Jan. 04 has always ‘stuck in my craw’:

DA investigating NYMEX executive - Manhattan, New York, district attorney's office, Stuart Smith - Melting Pot - Brief Article – Feb. 2, 2004

A top executive at the New York Mercantile Exchange is being investigated by the Manhattan district attorney. Sources close to the exchange said that Stuart Smith, senior vice president of operations at the exchange, was served with a search warrant by the district attorney's office last week. Details of the investigation have not been disclosed, but a NYMEX spokeswoman said it was unrelated to any of the exchange's markets. She declined to comment further other than to say that charges had not been brought. A spokeswoman for the Manhattan district attorney's office also declined comment.

The offices of the Senior Vice President of Operations - NYMEX – is exactly where you would go to find the records [serial number and smelter of origin] for EVERY GOLD BAR ever PHYSICALLY settled on the exchange. They are required to keep these records. These precise records would show the lineage of all the physical gold settled on the exchange and hence "prove" that the amount of gold in question could not have possibly come from the U.S. mining operations – because the amounts in question coming from U.S. smelters would undoubtedly be vastly bigger than domestic mine production.

We never have found out what happened to poor ole Stuart Smith – after his offices were "raided" – he took administrative leave from the NYMEX and he has never been heard from since. Amazingly (or perhaps not), there never was any follow up on in the media on the original story as well as ZERO developments ever stemming from D.A. Morgenthau’s office who executed the search warrant.

Are we to believe that NYMEX offices were raided, the Sr. V.P. of operations then takes leave - all for nothing? These revelations should provide a “new filter” through which Rothschild exiting the gold market back in 2004 begins to make a little more sense:

“LONDON, April 14, 2004 (Reuters) - NM Rothschild & Sons Ltd., the London-based unit of investment bank Rothschild (ROT.UL), will withdraw from trading commodities, including gold, in London as it reviews its operations, it said on Wednesday.”

Interestingly, GATA’s Bill Murphy speculated about this back in 2004;

“Why is Rothschild leaving the gold business at this time my colleagues and I conjectured today? Just a guess on my part, but suspect:”



Coincidentally (or perhaps, not?), GLD Began Trading 11/12/2004

In light of what has occurred – regarding the Gold ETF, GLD – after reviewing their prospectus yet again, it becomes pretty clear that GLD was established to purposefully deflect investment dollars away from legitimate gold pursuits and to create a stealth, cesspool / catch-all, slush-fund and a likely destination for many of these “salted tungsten bars” where they would never see the light of day – hidden behind the following legalese “shield” from the law:

Excerpt from the GLD prospectus on page 11:


Gold bars allocated to the Trust in connection with the creation of a Basket may not meet the London Good Delivery Standards and, if a Basket is issued against such gold, the Trust may suffer a loss. Neither the Trustee nor the Custodian independently confirms the fineness of the gold bars allocated to the Trust in connection with the creation of a Basket. The gold bars allocated to the Trust by the Custodian may be different from the reported fineness or weight required by the LBMA’s standards for gold bars delivered in settlement of a gold trade, or the London Good Delivery Standards, the standards required by the Trust. If the Trustee nevertheless issues a Basket against such gold, and if the Custodian fails to satisfy its obligation to credit the Trust the amount of any deficiency, the Trust may suffer a loss.

The Fed Has Already Been Caught Lying

Liberty Coin’s Patrick Heller http://www.libertycoinservice.com/ recently wrote,

Earlier this year, the Gold Anti-Trust Action Committee (GATA), filed a second Freedom of Information Act (FOIA) request with the Federal Reserve System for documents from 1990 to date having to do with gold swaps, gold swapped, or proposed gold swaps.

On Aug. 5, The Federal Reserve responded to this FOIA request by adding two more documents to those disclosed to GATA in April 2008 from the earlier FOIA request. These documents totaled 173 pages, many parts of which were redacted (covered up to omit sections of text). The Fed's response also noted that there were 137 pages of documents not disclosed that were alleged to be exempt from disclosure.

GATA appealed this determination on Aug. 20. The appeal asked for more information to substantiate the legitimacy of the claimed exemptions from disclosure and an explanation on why some documents, such as one posted on the Federal Reserve Web site that discusses gold swaps, were not included in the Aug. 5 document release.

In a Sept. 17, 2009, letter on Federal Reserve System letterhead, Federal Reserve governor Kevin M. Warsh completely denied GATA's appeal. The entire text of this letter can be examined at http://www.libertycoinservice.com/ http://www.gata.org/files/GATAFedResponse-09-17-2009.pdf

The first paragraph on the third page is the most revealing. Warsh wrote,

"In connection with your appeal, I have confirmed that the information withheld under exemption 4 consists of confidential commercial or financial information relating to the operations of the Federal Reserve Banks that was obtained within the meaning of exemption 4. This includes information relating to swap arrangements with foreign banks on behalf of the Federal Reserve System and is not the type of information that is customarily disclosed to the public. This information was properly withheld from you."

This paragraph will likely be one of the most important news stories of the year.

Though not stated in plain English, this paragraph is an admission that the Fed has in the past and may now be engaged in trading gold swaps. Warsh's letter contradicts previous Fed statements to GATA denying that it ever engaged in gold swaps during the time period between Jan. 1, 1990 and the present.

[Perhaps most importantly], this was GATA's second FOIA request to the Federal Reserve on the issue of gold swaps. The 173 pages of documents received for the 2009 FOIA request all pre-dated the 2007 FOIA request, which means they should have been released in the response to the earlier FOIA request. This establishes a likelihood that the Federal Reserve has failed to adequately search or disclose relevant documents. Further, the Fed response admitted that it had copies of relevant records that originally appeared on the Treasury Department Web site, but failed to include them in its response.

Now that Federal Reserve governor Warsh has admitted that the Fed has lied in the past about the Fed’s involvement with gold. It should now be very clear to everyone why the Fed is lying and the true nature of what they are hiding / withholding.

On Doing God’s Work

An important footnote to consider is the intertwined-ness of the U.S. Federal Reserve and the U.S. Treasury (can anyone really tell them apart?] as well as this duopoly’s two principal agents – J.P. Morgan-Chase and Goldman Sachs. When one truly grasps the nature of these highly conflicted relationships it gives a fuller meaning to words recently uttered by Goldman head, Lloyd Blankfein, who claimed, “I’m doing god’s work.”

Does this really mean that Mr. Blankfein believes that the Federal Reserve is god? You can judge for yourself. While the Fed prints money like no one else could - except god almighty himself (or Gideon Gono http://www.reuters.com/article/latestCrisis/idUSL2176351, perhaps?) – I really doubt that was the intent back in 1864, when the U.S. adopted “In God We Trust http://www.reuters.com/article/latestCrisis/idUSL2176351 http://en.wikipedia.org/wiki/In_God_We_Trust ” as their official motto.

And that’s my two cents worth for today.

Got (real) physical gold yet?

Rob Kirby

More for subscribers. Subscribe here http://www.kirbyanalytics.com/amform.htm.

1 comment:

  1. The $ 1123 question.
    I only just today read your excellent review of events in the gold market.Of course it is handed criminally.The truthfull answer to your questions lie in today`s price of gold: $ 1694 !
    after two years and nine months.In a massive global market.Holding down the price of gold is not possible.What do you think wil happen when $ and€ collapse?I am long Barrick Gold Mining Corp,thplanets largest gold producer.
    Kind regards, steen.baaring@gmail.com


Comments must be polite and well-reasoned, but passion is allowed when directed at the subject matter and not someone who posts -- violate this, and your comment doesn't get posted. Comments may not post immediately -- I'm pretty busy and don't live on the web.